Installing a Chip - Plug in a EZGO PDS Controller and Determining Which Chip - Plug Is Installed

Instructions for Installing a EZGO PDS Chip/Plug/Jumper and Determining Which One is Installed

  1. HotRodCarts
    :ezgo:
    Installing a Chip - Plug in a EZGO PDS Controller and Determining Which Chip - Plug Is Installed.

    To Install the chip/plug into the controller:
    1 - Flip the "run - tow" switch to tow.
    2 - Remove the controller cover.
    3 - Plug in...
    You do not have permission to view the full content of this resource.