Yamaha G19 Camber Issue

Discussion in 'Yamaha Driver's Club' started by JCart, May 21, 2016.

  1. JCart

    JCart New Member

    Hey all. Im new to this forum and hoping someone out there can answer my question. I have a '97 Yamaha G-19E that I have just replaced king pin and bushings but still has a bad camber issue (front tires lean in at the top / \). There is adjustment for the toe but none for the camber. The only thing i haven't replace yet are the shocks. Could this be the issue? I just paid a lot of money for new tires and don't want to wear them out on the inside half of the tread in this condition. Thanks!
     
  2. HotRodCarts

    HotRodCarts Cartaholic

    If the springs are weak on the shocks or the toe setting is off it will cause camber issues.
     
  3. JCart

    JCart New Member

    Ok thanks. I suspect that is the issue since there is nothing left after new king pins and bushings. I just wanted to see if anyone out there knew for sure before spending $200 on new shocks.
     

Share This Page